Chapel Power On

Video Tutorial:

Step By Step Guide:

1. Turn on the soundboard with the switch location on the back right side.



2. Underneath the soundboard, turn on the sound rack with the switch in the top right corner, as well as the amp at the bottom of the rack, by pressing the red power button once.



3. Turn on the power for the speakers with the switch labeled “PA POWER” located underneath the tech booth desk.



4. On the soundboard, navigate to the last page of faders on the right bank, then unmute the “Sub” and “LR” channels.



5. If you are going to be using the center screen computer, use the drop down switch mounted next to the soundboard to lower the projector screen.



6. Turn on the video rack with the power switch towards the top, then turn on the Center Screen Computer and the Side Screens Computer by pushing the silver power buttons.
1. Note: You may have to push a little harder on the silver power buttons for the computers to register the press.



7. Log into the computers using the Tech login and password.
1. Make sure you are logging in with the “Tech” user and not “CCCO”.
8. Before opening ProPresenter, use the remotes in the video rack drawer to turn on the Side Screen TVs, Center Projector, and Confidence Monitor.



9. If you would like to turn on the stage lights…
1. Open the Vista app on the Center Screen Computer.



2. When prompted with the initial pop-up, click “Open ‘SME Chapel’”.



3. Use the page up and down buttons to navigate to different cuelists, and press the play button on any cuelist to turn on the stage lights with that settings.



10. To turn on the house lights, you can do so by using these light switches on the wall, located directly beneath the thermostats.